Free Inquiry #3


For this blog, I am going to work on another small project to build my confidence with the sewing machine. For this project, I want to practise drafting a simple plan before I begin sewing, even if it is not a detailed pattern. I am also hoping to gain confidence in longer stitches and hems.

Practising longer stitches and hems will help me with almost all my future projects, including my café curtain and my overall goal of making a pair of pants. Learning to plan a project ahead of time will also help me think through the steps and construction before I begin.


For the first part of the project, I will only be focusing on cutting, measuring, and hemming all the pieces.

An example of the design I am going for.

    • I started by laying out my fabric and visualizing how big I wanted the main body of my project to be.
    • Once I settled on a good size, I recorded the measurements in my notes, making sure to leave an extra inch on each side for the hem.
    • I repeated this process for each of the pockets.
    • Here is my draft plan:

    1. Measure and Cut

    • I measured and cut each piece of fabric, leaving an extra two inches on each edge for hem allowance.
    • I marked the desired finished dimensions on each piece to guide me when folding and sewing.

    2. Hem Every Edge

    • I folded each edge along the marked lines and pinned the fabric in place.
    • I stitched along each fold to secure the hems.
    • I trimmed the excess fabric behind each hem.
    • I repeated this process for every edge of every piece.

    3. Sew the Two Backing Pieces Together

    • Since I did not feel that my fabric was thick or sturdy enough on its own, I decided to make the backing double-layered.
    • I laid the two pieces of fabric on top of each other, with the back sides facing each other.
    • I pinned the edges together.
    • I stitched along the edges to secure the two layers together.

    Despite measuring my fabric carefully, I found that my panels did not all end up the same size.

    Next time, I will check that the panels are aligned and the same size throughout each step of the process, rather than only checking at the beginning and end. This will help me catch mistakes earlier and ensure a more consistent final result.


    Hem allowance: The extra fabric left along an edge to allow it to be folded over and stitched into a hem.


    Next, I will attach the pockets to the backing panels and create and attach straps to hang my finished piece. I am excited to continue practising my sewing skills and see how all the pieces come together!